MWR-WE13N Wired Controller User Settings.

The Additional User Functions settings on Samsung wired controllers are access via a series of menus once the user set button is pressed. While easily accessed, without referencing the user manual menu, functions like count down timers, temperature limits and button locks can be accidentally set.

While the additional user functions can be quite useful in some applications, accidental activations on these functions can cause the perception that a fault is occurring with the air conditioner. Most commonly, the countdown timer is an additional user function that is accidentally set, as this is activated in the first menu. With the countdown timer set, the unit will turn of once the set time has expired. If issues are being experienced with the unit turning itself off, temperature set point can’t be adjusted or a button is restricted that used to work, a review of the additional users functions would be the first place to start.

1. If you want to set the detailed settings, press the User Set button.
-You will enter the User Set mode, and the [Main Menu] is displayed.
2.  Refer to the wired remote controller’s User Set list on the next page to select the desired menu.
– Using the [ up]/[down ] buttons, select a main menu number and press the [ ] button to enter the submenu setting screen.
– Using the [up]/[down ] buttons, select a sub-menu number and press the [ ] button to enter the data
setting screen.
– Once you have entered the setting screen, the current setting is displayed.
– Refer to the chart for data setting.

– Using the [up ]/[down ] buttons, change the settings and press the [ ] button to move to the next setting.
– Press the Set button to save the setting and exit to the sub-menu setting screen.
– Press the ESC button to exit to normal mode.

NOTE
– While setting the data, you can use the [ left]/[right ] buttons to set the range of SEG used.
– While configuring the setting, press the ESC button to exit to the sub-menu setting screen without
saving the setting.

1)*
The set temperature range available on the remote controller may change depending on the set
temperature range that indoor unit supports.
NOTE
– ’ NONE’ is displayed if the indoor unit does not support the function. In some cases, the setting may not
possible or it may be not applied though it is set on the unit.
– Summer time: Practice of temporarily advancing clocks during the summertime.
– The Air purity level lighting function can be operated as a user option. This function is available only on
specific models